Introduction:
Adopting four-leads guiding system ,with high strong vibration motor and using both compression of the upper and the bottom mould enhance the productivity and quality, at the same time can adapt to the different kinds of material for various blocks. Main technical specification:
| Molding pieces | 390mm×190mm×190mm 4pcs/mold 390mm×240mm×190mm 3pcs/mold 390mm×120mm×190mm 6pcs/mold 240mm×115mm×53mm 21pcs/mold (Note:The mold according to your requirement) |
| Molding cycle | 35s/time |
| Vibration frequency frequency | 2800rpm |
| Productivity | 2000-2500 pcs/day(count by quantity of per mold) |
| Exciting power | 28KN |
| Power | 9.7KW(Total power in the next page) |
| Vibration form | Platform vibration |
| Pallet size | 850mm×460mm×40mm(30)mm |
QTJ4 - 35 type electric block forming machine, the host can be operated independently, also can be equipped with a belt conveyor, a pipeline
mixer. The host comprises a vibration source, transmission, lifting, pushing, hopper, die electric control box system.Lifting system: compose of cycloid pin motor, sprockets, lift arm, axle sleeve and hanging pin, positioning pin.
the cycloid pin motor with 1.5 kilowatt driven spindle at both ends of crank arm. Lift and lower the mold in parallel driven by the lift arm, The upper mold and beam hanging by both sides, balanced in the positioning plate. Hanging from the upper mold.make upper mold leave the molding box smoothly.
Vibration system: under vibration compose of two set vibrator combination with 3KW. vibration above formed by a 1.5KW vibrator up and down.
Raw material :
QTJ4 - 35 type block machine include normal concrete and lightweight concrete raw materials, can use river sand, mechanism sand, gravel, crushed stone, slag, stone and other materials. Meanwhile,it can also use cinder, fly ash, pumice stone, ceramic, perlite, shale and other materials, wide suitability, as long as the raw materials with the power electricity, it can be produced.Foundation Drawing:
Inquiry service:
Accept user's enquiries by all kinds of ways and establish user's product cognition.Provide all kinds of product data and let customer understand characteristics of product.
Pre-sale service:
Accept inquiry of customers ,/confirm/iation of investment advice of choice of product ,assist the customers to design the workshop
In-sale service:
Sale of product,help customers build the base ,technical training of customers' workers ,practice of operation ,help to install ,train the operators in the workshop.
After-sale service:
24 hours service of technology inquiry, instant components supply, regularly technical service guidance of maintain,long distance malfunction control.
Unique service:
System upgrade,special design according to the customers' requirement, mould renew ,supply new technology and products information.